ABMA-199:1997 pdf free

ABMA-199:1997 pdf free.Roling bearings一Thrust bearings一Tolerances
This International Standard specifies tolerances for boundary dimensions (except chamfer dimensions) and for running accuracy of thrust rolling bearings with flat back faces speified in ISO 104.
This International Standard does not apply to certain thrust bearings, e.g. needle roller bearings, or for particular fields of application, e.g. special precision bearings.Chamfer dimension limits are given in ISO 582.
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibiity of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
ISO 104:1994, Rolling bearings一Thrust bearings一Boundary dimensions, general plan.
ISO 582:1995, Rolling bearings一Chamfer dimensions一Maximum values.
ISO 1132:1980, Rolling bearings一Tolerances一Definitions.
ISO 5593:1997, Rolling bearings 一Vocabulary.
The symbols (except those for tolerances) and the values given in the tables denote nominal dimensions unless specified otherwise.
bore diameter of shaft washer, single-direction bearing
bore diameter of shaft washer, double-direction bearing
Admp deviation of mean bore diameter in a single plane of shaft washer, single-direction bearing
deviation of mean bore diameter in a single plane of shaft washer, double-direction bearing outside diameter of housing washer
deviation of mean outside diameter in a single plane of housing washer
variation in thickness between housing washer raceway and back face
NOTE一Applies only to ball thrust bearings and cytindrical roller thrust bearings with 90° contact angle.variation in thickness between shaft washer raceway and back face
NOTE一Applies only to ball thrust bearings and cylindrical roller thrust bearings with 90° contact angle.
bearing height, single-direction bearing
bearing height, double direction bearing
deviation of the actual bearing height, single-direction bearing
deviation of the actual bearing height, double-direction bearing
variation of bore diameter in a single plane of shaft washer, single-direction bearing
variation of bore diameter in a single plane of shaft washer, double-direction bearing.ABMA-199 pdf free download.